Installation

To install your Smart Oil Gauge, simply follow the instructions on the QuickStart Guide that came in the box. You can also view the QuickStart Guide here:

Tips:

  • Configure your Smart Oil Gauge BEFORE installing it on your tank. It is always easier to troubleshoot WiFi issues from the kitchen table than from an oil tank.
  • DO NOT USE TEFLON TAPE on the threads that mate with your oil tank. Teflon tape can break down and end up in the oil over time.
  • Tighten the Smart Oil Gauge using a PIPE WRENCH on the metal body of the device. This will ensure the gauge is adequately threaded in and will provide correct readings. Oil tanks can see quite a bit of pressure during a fill, so it is important not to hand-tighten anything into your oil tank.